DropOS

ATTENTON Work Voltage:5V DC     How to Connect the DMX Wireless PCB : Red wire :5V/12V-48V-DC Black wire:5V/12V-48V-DC Anther Black wire: Connector 1 /GND Blue wire: Connector 3 Yellow wire: Connector 2 that connection is suit for 99% of the DMX set ,if cannot work ,pls exchange the blue and yellow wire FEATURES Tricolor LED displaying. 126 channels jumping frequency automatically. 7 groups ID code settable. Small size, easy to suit for interior of accessed lighting. SPECIFICATIONS Input voltage: 5V/12V-48V DC 500mA MIN Communication distance: 400M ( visible distance ) Work frequency section: 2.4G ISM Max transmitting power rate: 20dBm Receiver sensitive: -94dBm Signal port: 3pin female plug OPERATING MANUAL ID code and LED color corresponding relationship: 1: RED 2: GREEN 3: RED+GREEN 4: BLUE 5: RED+BLUE 6: GREEN+BLUE 7: RED+GREEN+BLUE Press key 1 time to indicate ID setting, press again to set IC. Working condition: LED constant lit up: no DMX or wireless signal. Red LED flash: transmitting. Green LED flash: receiving total 126 channels, it's searching automatically. ID Code- "1-7" groups ID code, press "KEY" for setting. Establishing Communication: Power on. Communication was established correctly .